PAC-49S
process display 96 x 48 mm with contacts and analogue outputs
The PAC-49S process meter features current input
with protection safeguarding the measuring
resistor against damage. The measurement is
visible simultaneously on the 4-decade LED
display and 20- point, two-colour bargraph
reflecting 0-100% of measuring range. The set
threshold values are also shown on the bargraph,
and the LEDs indicate when the values are
exceeded. The device operates in the following
modes:
linear, root, square and user defined (max. 20
points). 2 or 4 relay (or OC) outputs enable
adjustment of the level of the measured signal.
These outputs can be controlled according to
one or two threshold values.
Features
- process meter with multicolour bargraph
- input 0/4...20mA, 0/1...V, 0/2...10V
- 0,2 or 4 relay outputs (or OC)
- option: active current output
- interface RS-485/Modbus RTU
Functionality:
- programmable measuring range,
- programmable hystereses and delays of control outputs,
- password protected,
- programmable indication filtration,
- overload-protected current input.